7/10 kV silicone high-voltage ignition cable is a flexible single-core cable for automotive ignition circuits and other installations exposed to large ambient-temperature variations.
Applications
This silicone ignition cable is intended primarily for automobile applications and high-temperature ignition connections. Its stated fixed-installation temperature range supports environments up to +180°C.
Construction
Flexible tinned copper conductor with silicone rubber compound insulation and an oxblood-red silicone sheath. Glass-fibre braid is available on request where the project requires it.
Technical Parameters
| Parameter | Value |
|---|---|
| Rated voltage Uo/U | 7 kV |
| Test voltage, AC 50 Hz | 10 kV |
| Insulation resistance | >100 MΩ/km |
| Conductor temperature | +180°C |
| Short-circuit temperature | +250°C |
| Temperature range, fixed | -60°C to +180°C |
| Minimum bending radius, fixed | 7.5 × D |
| Flame performance | IEC 60332-1; IEC 60332-3 |
Available Sizes
| Cross section (mm²) | Approx. outer diameter (mm) |
|---|---|
| 1.0 | 6 |
| 1.5 | 7 |
Values are nominal. Confirm ignition-system voltage, installation temperature and conductor size before ordering.
Request a Quote
Send your required voltage, conductor size and environment. Request a Quote.
